Search
Filters
Close

Special offer! All Clearance books for $15 only. Valid from April 19 – 30, 2021, while supplies last. Shop Now

10085 Corrosion Comparisons Among Magnesium Alloys of Interest for DoD Systems Using Laboratory Based Accelerated Corrosion Methods

Product Number: 51300-10085-SG
ISBN: 10085 2010 CP
Author: Brian E. Placzankis, Chris E. Miller, Suveen N. Mathaudhu and Richard D. Delorme
Publication Date: 2010
$0.00
$20.00
$20.00
Test specimens of various magnesium alloys common to U.S. Department of Defense (DoD) systems or proposed for use in DoD systems were identically prepared and exposed under bare uncoated conditions in chamber based laboratory accelerated corrosion test methods to assess their relative susceptibilities to general and pitting corrosion attack. The methods used were ASTM B 117 neutral salt fog (NSF) and GM 9540P cyclic accelerated corrosion. The NSF specimens were compared at intervals of 18, 72, and 168 hours. The GM 9540P specimens were assessed at 1, 5, and 10 cycle intervals. The visual corrosion assessments were graphically obtained using flatbed scanning techniques. Following the exposures, final mass loss measurements were obtained for all specimens.

Keywords: Corrosion, magnesium, alloys, ZE41B, AZ31B, AZ91C, WE43B, ZK60A, K1A, salt fog, cyclic corrosion, GM 9540P
Test specimens of various magnesium alloys common to U.S. Department of Defense (DoD) systems or proposed for use in DoD systems were identically prepared and exposed under bare uncoated conditions in chamber based laboratory accelerated corrosion test methods to assess their relative susceptibilities to general and pitting corrosion attack. The methods used were ASTM B 117 neutral salt fog (NSF) and GM 9540P cyclic accelerated corrosion. The NSF specimens were compared at intervals of 18, 72, and 168 hours. The GM 9540P specimens were assessed at 1, 5, and 10 cycle intervals. The visual corrosion assessments were graphically obtained using flatbed scanning techniques. Following the exposures, final mass loss measurements were obtained for all specimens.

Keywords: Corrosion, magnesium, alloys, ZE41B, AZ31B, AZ91C, WE43B, ZK60A, K1A, salt fog, cyclic corrosion, GM 9540P
Product tags
Also Purchased
Picture for 08232 Pitting Corrosion Study in an AE44 Magnesium Alloy
Available for download

08232 Pitting Corrosion Study in an AE44 Magnesium Alloy

Product Number: 51300-08232-SG
ISBN: 08232 2008 CP
Author: Roxanna Alvarez, Augusto Ruiz, and Mark Horstemeyer
Publication Date: 2008
$20.00
Picture for 06082 ELECTROCHEMICAL NOISE STUDY ON THE CORROSION
Available for download

06082 ELECTROCHEMICAL NOISE STUDY ON THE CORROSION OF MAGNESIUM GALVANIC ANODES IN NaCl AND CaSO4-Mg(OH)2 SOLUTIONS

Product Number: 51300-06082-SG
ISBN: 06082 2006 CP
Author: J.Genesca, F. Guadarrama, R. Duran and J. Mendoza
$20.00
Picture for 05370 Electrochemical Noise Analysis in a
Available for download

05370 Electrochemical Noise Analysis in a Frequency Domain of AZ91D and ZXJ530 Magnesium Alloys in Chloride Solutions

Product Number: 51300-05370-SG
ISBN: 05370 2005 CP
Author: Edward Ghali, Universite Laval; Anne Marie Lafront, D. Dube, and Real Tremblay, Petro-Canada Product
$20.00