Overview of coatings for a cyclic-temperature environment. Test method, including a heat cycle between 21 to 300 deg-C simulating the dehydrator operation and exposure to salt spray. The performances of the three coatings were evaluated using this method. Factors to be considered for coating selection in the cyclic-temperature environment are discussed.c
Encapsulation of Linseed Oil & Tung Oil in urea-formaldehyde shells was performed using in-situ polymerization technique. Thin film self-healing coatings with uniform and quick self-healing ability were achieved with microcapsules at concentration of 3 wt%. Anti-corrosive performance was evaluated using immersion test & electrochemical impedance spectroscopy (EIS).