Search
Filters

CorrCompilation: Oil Production Chemicals, Volume 2

The “CorrCompilation: Oilfield Production Chemicals” series covers production, selection, performance evaluation, application, monitoring, and optimization of oilfield chemicals. The oilfield chemicals presented are corrosion inhibitors, biocides, scale inhibitors, and drag reducers. The editor, Joseph Itodo Emmanuel, believes it is a “must-have reference book” for corrosion engineers in the field, technicians, and field operation supervisors due to its broad spectrum. 

He suggests the compilation could be used for a university-level engineering or scientific course on oilfield chemicals or tailored training to enhance the technical knowledge of field personnel on oilfield chemical application and management.

Since this CorrCompilation series consists of 90 NACE technical papers or articles, it is published in three volumes.

Volume 1: Development and Selection

Volume 2: Performance Evaluation and Application

Volume 3: Monitoring and Optimization

Each volume contains current research findings, field treatment practices, best practices, and scientific and engineering concepts.

2019 NACE e-book

Product Number: 37638-e
ISBN: 978-1-57590-397-2
Author: Edited by Joseph Itodo Emmanuel
Publication Date: 2019
$97.50
$130.00
$130.00

The “CorrCompilation: Oilfield Production Chemicals” series consists of three volumes and presents oilfield chemicals used for flow assurance and corrosion-control purposes in the oil and gas industry. The papers presented provide comprehensive and up-to-date information on the development, selection, performance evaluation, application, monitoring, and optimization of four oilfield chemicals (corrosion inhibitors; biocides; scale inhibitors; H2S scavengers, dispersants, and drag reducers). Oilfield chemicals are applied to oil and gas wells, production equipment, transmissions, and gathering pipelines and utilities.

Corrosion inhibitors are applied in batches or on a continuous basis in minimum concentrations to control and lower the corrosion rate to an acceptable level. The goal is to achieve and possibly exceed the design life of the asset while maintaining asset integrity.

Biocides are applied by batch or slug treatments in the dose recommended by the manufacturer or determined to achieve maximum effectiveness during the field trial. The contact time for biocides to kill microbes in the system is often short.

Scale inhibitors are used in the field if there is a known risk of asset damage due to scale—either from existing or previous field operations, experiences, or model predictions.

Drag reducers are used in oil and gas pipelines to reduce frictional losses and turbulence and improve flow efficiency and capacity for production.

Volume 2: Performance Evaluation and Application,” is arranged in two sections:

• Performance Evaluation of Oilfield Chemicals, which focuses on test methods, approaches, techniques, parameters, and factors to be considered during oilfield chemical performance evaluation. Also, the importance of oilfield chemical efficiency and availability during the evaluation is discussed by notable authors.

• Application of Oilfield Chemicals, which focuses on field experiences, challenges of applying oilfield chemicals in onshore and offshore environments, corrosion availability models, and an integrated approach to oilfield chemical application.

2019 NACE e-book

The “CorrCompilation: Oilfield Production Chemicals” series consists of three volumes and presents oilfield chemicals used for flow assurance and corrosion-control purposes in the oil and gas industry. The papers presented provide comprehensive and up-to-date information on the development, selection, performance evaluation, application, monitoring, and optimization of four oilfield chemicals (corrosion inhibitors; biocides; scale inhibitors; H2S scavengers, dispersants, and drag reducers). Oilfield chemicals are applied to oil and gas wells, production equipment, transmissions, and gathering pipelines and utilities.

Corrosion inhibitors are applied in batches or on a continuous basis in minimum concentrations to control and lower the corrosion rate to an acceptable level. The goal is to achieve and possibly exceed the design life of the asset while maintaining asset integrity.

Biocides are applied by batch or slug treatments in the dose recommended by the manufacturer or determined to achieve maximum effectiveness during the field trial. The contact time for biocides to kill microbes in the system is often short.

Scale inhibitors are used in the field if there is a known risk of asset damage due to scale—either from existing or previous field operations, experiences, or model predictions.

Drag reducers are used in oil and gas pipelines to reduce frictional losses and turbulence and improve flow efficiency and capacity for production.

Volume 2: Performance Evaluation and Application,” is arranged in two sections:

• Performance Evaluation of Oilfield Chemicals, which focuses on test methods, approaches, techniques, parameters, and factors to be considered during oilfield chemical performance evaluation. Also, the importance of oilfield chemical efficiency and availability during the evaluation is discussed by notable authors.

• Application of Oilfield Chemicals, which focuses on field experiences, challenges of applying oilfield chemicals in onshore and offshore environments, corrosion availability models, and an integrated approach to oilfield chemical application.

2019 NACE e-book

Also Purchased