This standard presents recommended practices for the control of internal corrosion in steel pipelines and piping systems used to gather, transport, or distribute crude oil, petroleum products, or gas. It is meant to serve as a guide for establishing minimum requirements for control of internal corrosion in crude oil gathering and flow lines, crude oil transmission, hydrocarbon products, gas gathering and flow lines, gas transmission, and gas distribution. This standard is maintained by Task Group 038. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7-10 DAYS FOR PROCESSING BEFORE SHIPPING.
Revised in 2019! This Standard Practice provides the most current technology and industry practices for material requirements and the use of tape coatings for external mainline coating, coating repair, coating rehabilitation, and coating weld joints on buried metal pipelines. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7-10 DAYS FOR PROCESSING BEFORE SHIPPING.
Provides detailed recommendations for the use of rubber-lining protection on new and in-service equipment, including recommended dimensions and considerations in the design of equipment that is to be lined, as well as important factors to consider when choosing a rubber lining or adhesive. Installation and curing of rubber linings, including specific procedures for properly lining joints, flanges, and ends of pipe, are also covered. Recommended inspection and repair specifications are also outlined. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7 DAYS FOR PROCESSING BEFORE SHIPPING.