Presents guidelines for cathodic protection of reinforcing steel in concrete structures. The guidelines are limited to impressed current cathodic protection systems for new or existing atmospherically exposed reinforced concrete and are not intended for application to prestressed concrete. Criteria described include 100 mV polarization development/decay, statistical distribution analysis, and E-log I analysis.
Provides detailed recommendations for the use of rubber-lining protection on new and in-service equipment, including recommended dimensions and considerations in the design of equipment that is to be lined, as well as important factors to consider when choosing a rubber lining or adhesive. Installation and curing of rubber linings, including specific procedures for properly lining joints, flanges, and ends of pipe, are also covered. Recommended inspection and repair specifications are also outlined. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7 DAYS FOR PROCESSING BEFORE SHIPPING.
Revised in 2016! This NACE International standard practice defines the process necessary to design, install, and operate a thermoplastic-lined oilfield pipeline and provides a foundation for proper use of thermoplastic liners in cases where there is no established standard. It is not intended to replace existing national or corporate standards and requirements based on specific local experience. This standard is intended for use by liner installers, owners of lined pipelines and pipelines that might at some point need a liner, liner materials suppliers, and consultants, and engineering firms engaged in the subject field. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7-10 DAYS FOR PROCESSING BEFORE SHIPPING.
This NACE International standard practice includes guidelines for surface preparation, material requirements, application, and handling of hot- and cold-applied wax and component wrappers and wax-based tape coating systems for the protection of underground pipe, fittings, and valves. The standard outlines material requirements for hot- and cold-applied wax coatings, and handling of the coated components, and includes five tables that provide material requirements and references to standard test methods for the various coating materials discussed. This standard is intended for use by corrosion control personnel, design engineers, project managers, purchasers, and construction engineers and managers.