This joint NACE/ASTM standard defines commonly used terms in the field of corrosion as agreed by a joint NACE/ASTM committee. It also includes acronyms for corrosion-related expressions, listed in two sections—with the words the acronym stands for first in one section, and the acronym first in the next section. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7-10 DAYS FOR PROCESSING BEFORE SHIPPING.
Provides a procedure for measuring the surface profile of abrasive blast-cleaned steel that involves using a special tape that replicates the surface profile. The standard covers the areas of equipment and procedures, provides a definition of “surface profile,” and includes an appendix that presents the results of a round-robin series of measurements illustrating the degree of accuracy of the procedure described in the standard. A second appendix statistically summarizes the data presented in the first appendix.PRINTED HARD COPIES REQUIRE A MINIMUM OF 7-10 DAYS FOR PROCESSING BEFORE SHIPPING.
This standard addresses corrosion of reinforcing steel in concrete, a serious problem throughout the world in parking structures, bridges and roadways, buildings, sanitary and water facilities, marine structures, concrete pipe, storage facilities, and other structures. This corrosion is directly attributable to the presence of significant amounts of aggressive substances at the steel surface. This standard provides procedures to control corrosion of conventional reinforcing steel in Portland cement concrete structures through the application of chloride extraction or realkalization. These electrochemical techniques are related to the use of impressed current cathodic protection of steel in concrete, as described in NACE SP0290. PRINTED HARD COPIES REQUIRE A MINIMUM OF 7-10 DAYS FOR PROCESSING BEFORE SHIPPING.