The effect of the combined uncertainties on the performance of bolts in drilling and production systems using a Bayesian probabilistic approach. Also - managing the performance of bolts.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact NACE First Service for assistance.
Use this error code for reference:
Please login to use NACE Standards Credits*
* NACE Members receive NACE Standards Credits in order to redeem eligible NACE Standards and Reports in the Store
You are not a NACE Member.
NACE Members enjoy many benefits, including NACE Standards Credits which can be used to redeem eligible NACE Standards and Reports in the Store.
You can visit the NACE Membership Page to learn about the benifits of NACE membership.
You have previously purchased this item.
Go to Downloadable Products in your NACE Store profile to find this item.
You do not have sufficient NACE Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your NACE Standards Credit(s)
Please review your transaction.
Click on 'REDEEM' to use your NACE Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your NACE Store Profile to find and download this item.
The goal of The Nuclear Energy Agency (NEA) is to assist its member countries in ensuring safety, through regulation and oversight of nuclear installations, and to preserve the scientific and technological knowledge base.
A high-strength, alumina-based solid scale inhibitor - developed for subsea applications – was applied to four zones in two deepwater Gulf of Mexico wells. Results were examined after 17 months of production.
This study used untreated pond water containing corrosive anions and MIC-causing bacteria as an accelerated testing environment to explore the feasibility of nitrogen as a deoxygenation gas to mitigate corrosion of sprinkler pipes.
This study describes the functionalization of a hybrid sol-gel polymeric coating with MOLY or ZAPP corrosion inhibitors and viable endospores of Bacillus licheniformis isolate (B6).
Jerrycans made of a high density polyethylene (HDPE) were filled with E85 and biodiesel and then exposed to temperatures of 20 °C (68°F) and 40 °C(104°F) for 5 years to study the interaction between HDPE and permeation barriers.
Here we would like to elaborate on corrosion risk associated with coatings that shield cathodic protection.
Latest developments in iron sulfide dissolver studies. Lab tests performed to evaluate some new products for thermal stability, corrosivity, compatibility with formation water, and dissolving authigenic mineral and field deposits.
Laboratory investigation on the impacts of enhanced oil recovery (EOR) chemicals, i.e., surfactant and polymer, on calcium carbonate scale formation and inhibition.
In the current study, mild steel specimens (API 5L X65) were exposed to a 1 wt% NaCl solution sparged at 0.096 MPa pCO2 and 15 ×10-6 MPa or less pH2S (≤ 150 ppm H2S/CO2).
The intent was to understand if the low ferrite limits commonly associated with acceptable toughness in austenitic welds can be used on ASTM A 351 Grade CF3M and CF8M castings.
Evaluation of Post-Tensioned (PT) structures and the PT impregnation technique to mitigate corrosion of grouted PT tendons. Project case studies and laboratory research will be presented to demonstrate the technique and its effectiveness.