Search
Filters

SP0715 WAB-2015-SG, NACE WAB-1/SSPC-SP 5 (WAB), “White Metal Wet Abrasive Blast Cleaning”

This standard, SSPC-SP 5 (WAB)/NACE WAB-1, defines  the "White Metal"  level of surface cleanliness for wet abrasive methods.  One of five wet abrasive (WAB) levels: (White Metal, Near-White Metal, Commercial, Industrial, Brush-Off)

Product Number: 21198-SG
ISBN: 1-57590-323-7
Publication Date: 2015
$25.00
$25.00
$25.00

Or

This NACE/SSPC joint standard is one of a set of five new companion standards:

• SSPC-SP 5 (WAB)/NACE WAB-1, White Metal Wet Abrasive Blast Cleaning

• SSPC-SP 10 (WAB)/NACE WAB-2, Near-White Wet Abrasive Blast Cleaning

• SSPC-SP 6 (WAB)/NACE WAB-3, Commercial Wet Abrasive Blast Cleaning

• SSPC-SP 14 (WAB)/NACE WAB-8, Industrial Wet Abrasive Blast Cleaning

• SSPC-SP 7 (WAB)/NACE WAB-4, Brush-Off Wet Abrasive Blast Cleaning

These define the processes for preparing a carbon steel surface to a specified degree of surface cleanliness using a wet abrasive blast (WAB) method of cleaning. Each WAB standard represents one of five levels of cleanliness achievable by WAB, including Near-White Metal, White Metal, Commercial, Industrial, and Brush Off. NACE SP0715 joint standard NACE WAB-1/SSPC-SP 5 (WAB), White Metal WAB Cleaning defines the process for preparing a carbon steel surface to the White Metal degree of surface cleanliness using a WAB method of cleaning, and is used when the objective is to remove all rust and other corrosion products, coating, mill scale, and other foreign matter from the surface. White Metal WAB Cleaning provides a greater degree of cleaning than Near-White Metal WAB Cleaning [SSPC-SP 10 (WAB)/NACE No. 2 (WAB)]. This standard is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to define a standard degree of surface cleanliness for carbon steel surfaces to be achieved by wet abrasive blast cleaning.

Key words:, brush off WAB cleaning, carbon steel, cleanliness level, commercial WAB cleaning, corrosion inhibitors, dew point, dust contamination, flash rust, industrial WAB cleaning, near-white metal, nonvisible contamination, rust-back, surface cleanliness, surface preparation, surface profile, tape pull test, TG 350B, visible surface contaminants, WAB, wet abrasive blast, wet abrasive selection wipe test, white metal

This NACE/SSPC joint standard is one of a set of five new companion standards:

• SSPC-SP 5 (WAB)/NACE WAB-1, White Metal Wet Abrasive Blast Cleaning

• SSPC-SP 10 (WAB)/NACE WAB-2, Near-White Wet Abrasive Blast Cleaning

• SSPC-SP 6 (WAB)/NACE WAB-3, Commercial Wet Abrasive Blast Cleaning

• SSPC-SP 14 (WAB)/NACE WAB-8, Industrial Wet Abrasive Blast Cleaning

• SSPC-SP 7 (WAB)/NACE WAB-4, Brush-Off Wet Abrasive Blast Cleaning

These define the processes for preparing a carbon steel surface to a specified degree of surface cleanliness using a wet abrasive blast (WAB) method of cleaning. Each WAB standard represents one of five levels of cleanliness achievable by WAB, including Near-White Metal, White Metal, Commercial, Industrial, and Brush Off. NACE SP0715 joint standard NACE WAB-1/SSPC-SP 5 (WAB), White Metal WAB Cleaning defines the process for preparing a carbon steel surface to the White Metal degree of surface cleanliness using a WAB method of cleaning, and is used when the objective is to remove all rust and other corrosion products, coating, mill scale, and other foreign matter from the surface. White Metal WAB Cleaning provides a greater degree of cleaning than Near-White Metal WAB Cleaning [SSPC-SP 10 (WAB)/NACE No. 2 (WAB)]. This standard is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to define a standard degree of surface cleanliness for carbon steel surfaces to be achieved by wet abrasive blast cleaning.

Key words:, brush off WAB cleaning, carbon steel, cleanliness level, commercial WAB cleaning, corrosion inhibitors, dew point, dust contamination, flash rust, industrial WAB cleaning, near-white metal, nonvisible contamination, rust-back, surface cleanliness, surface preparation, surface profile, tape pull test, TG 350B, visible surface contaminants, WAB, wet abrasive blast, wet abrasive selection wipe test, white metal

Also Purchased