Search
Filters
Close

Save up to 75% off Clearance Books.  No promo code needed.  Shop Now

51313-02079-Study of C110 Critical Stress Intensity Factor (KISSC) in Various Weak H2S Solutions

Product Number: 51313-02079-SG
ISBN: 02079 2013 CP
Author: Samar Saha
Publication Date: 2013
$0.00
$20.00
$20.00

Abstract:

The presence of hydrogen sulfide (H2S) in the oil and gas exploration and production process poses hydrogen embrittlement and sulfide stress cracking (SSC) concerns for high-strength low-alloy (HSLA) steels commonly used in Oil Country Tubular Goods. This paper presents Critical Stress Intensity Factor (KISSC) data on two heats of standard mill-produced C110 casing (micro alloyed 4130 type steel). Double Cantilevered Beam (DCB) samples from this material were tested in NACE A solution to the requirements of NACE Standard TMO177 Method D in various sour environments (3.5% 7.0% 14% 22.0% 50% and 100% H2S) under a range of applied loads (wedges 20 25 30 35 and 40 mils thick ). A simplified approach is presented to derive and develop DCB test variables an acceptance range for KISSC and KISSC compliance for C110 material exposed to H2S environments that are not covered by the current NACE Standard
 

Abstract:

The presence of hydrogen sulfide (H2S) in the oil and gas exploration and production process poses hydrogen embrittlement and sulfide stress cracking (SSC) concerns for high-strength low-alloy (HSLA) steels commonly used in Oil Country Tubular Goods. This paper presents Critical Stress Intensity Factor (KISSC) data on two heats of standard mill-produced C110 casing (micro alloyed 4130 type steel). Double Cantilevered Beam (DCB) samples from this material were tested in NACE A solution to the requirements of NACE Standard TMO177 Method D in various sour environments (3.5% 7.0% 14% 22.0% 50% and 100% H2S) under a range of applied loads (wedges 20 25 30 35 and 40 mils thick ). A simplified approach is presented to derive and develop DCB test variables an acceptance range for KISSC and KISSC compliance for C110 material exposed to H2S environments that are not covered by the current NACE Standard
 

Product tags
Also Purchased
Picture for 10315 DCB Testing of C110 Material in Standard and Mild Sour Test Conditions
Available for download

10315 DCB Testing of C110 Material in Standard and Mild Sour Test Conditions

Product Number: 51300-10315-SG
ISBN: 10315 2010 CP
Author: C. Bosch, E. Wanzenberg, A.Gateaud, H. Marchebois, L. Delattre, R. Cury and C. Linne
Publication Date: 2010
$20.00
Picture for Review of Codes & Standards on Electrically Resistive Coatings & What That Means to Shielding
Available for download

51313-02080-Review of Codes & Standards on Electrically Resistive Coatings & What That Means to Shielding

Product Number: 51313-02080-SG
ISBN: 02080 2013 CP
Author: Bob Buchanan
Publication Date: 2013
$20.00
Picture for Corrosion Abatement in Amine Gas Scrubbing Units
Available for download

51313-02038-Corrosion Abatement in Amine Gas Scrubbing Units

Product Number: 51313-02038-SG
ISBN: 02038 2013 CP
Author: Ksenija Babic-Samardzija
Publication Date: 2013
$20.00